This is a replacement key for the Chrysler Voyager used from 1998 to 2008. It can be used to replace a worn or damaged key. The transponder chip can be transferred from your worn or damaged key and put into the new one.
The transponder chip goes here:
The key can be cut and also provided with a transponder chip if required.
The key code will take one of the following formats:
- The letter L followed by four digits in the range 0001 to 3580.
- The letter M followed by four digits in the range 0001 to 2618.
The key code is usually recorded in the vehicle service book.
The key can be cut from the key code or a decent digital picture of an existing key for the vehicle.
A picture like this taken from the top:
If the key is cut from a picture the key code will be provided. If you ever require another key then one can be cut from this key code.
Additional keys are programmed into a Chrysler Voyager from 1998 to 2008 using a diagnostic machine plugged into the vehicle.
Alternatively... if a key that starts a vehicle manufactured from 1998 to 2003 is brought or sent to us we have the facilities to copy the transponder chip within it onto a new one. The new key will then start the vehicle without any further programming being required.
Otherwise... if the vehicle is brought to us we have the facilities to program a new key into the vehicle.
Email us at enquiries@keymoon.uk for further information.
If you have a question about this item then please send a message to: enquiries@keymoon.uk
