This is a replacement key for the Fiat Panda used from 1995 to 2002. It can be used to replace a worn or damaged key. The transponder chip can be transferred from your worn or damaged key and put into the new one.
The transponder chip goes here:
The key can be cut and also provided with a transponder chip if required.
The key code will take one of the following formats:
- A four digit number in the range 3001 to 4000.
- A four digit number in the range 6001 to 7000.
- The letter J followed by four digits in the range 3001 to 6732.
- The letter N followed by four digits in the range 6001 to 7000.
- The letter V followed by four digits in the range 0001 to 3056.
- The letter N followed by four digits in the range 5001 to 8058.
- The letters AB followed by four digits in the range 6001 to 6891.
For example: AB6981 as shown below.
The key code is recorded on a card like this:
This card should be located within the vehicle documentation wallet.
The key can be cut from the key code or a decent digital picture of an existing key for the vehicle.
A picture like this taken from the top:
If the key is cut from a picture the key code will be provided. If you ever require another key then one can be cut from this key code.
You can program additional keys into a Fiat Panda from 1995 to 2002 using a manual procedure. To do this you must be in possession of a red master key that starts the vehicle.
The key programming procedure is available here:
Fiat Panda 1995-2002 key programming
If you do not have a master key then you will not be able to use this procedure.
Alternatively... if a key that starts the vehicle is brought or sent to us we have the facilities to copy the transponder chip within it onto a new one. The new key will then start the vehicle without any further programming being required. Email us at enquiries@keymoon.uk for further information.
If you have a question about this item then please send a message to: enquiries@keymoon.uk
