Ford Connect three button remote with flip key FO21

The key code will take the following format:

• A letter T followed by six digits from the group 1, 2, 3 or 4.

For example: T114143 as shown below.

The key code is recorded on a black plastic tag like this:

This tag would have been attached to the keys when the car was new.

The key can be cut from the key code or two decent digital pictures of an existing key for the vehicle.

A picture like this taken from the top:

And one like this taken from the side:

If the key is cut from pictures the key code will be provided. If you ever require another key then one can be cut from this key code.

You can program additional keys into a Ford Connect from 2002 to mid 2007 using a manual procedure. To do this you must be in possession of two unique keys that start the vehicle. The transponder chip in one key can't be a copy or clone of the other.

The key programming procedure is available here:

Ford Connect 2002-2007 key programming

If you do not have two unique keys then a diagnostic machine plugged into the vehicle will be required. From mid 2007 a diagnostic machine is required.

Alternatively... if a key that starts the vehicle is brought or sent to us we have the facilities to copy the transponder chip within it onto a new one. The new key will then start the vehicle without any further programming being required. Email us at enquiries@keymoon.uk for further information.

You can program additional remotes into a Ford Connect from 2002 to 2013 using a manual procedure.

The remote programming procedure is available here:

Ford Connect 2002-2013 remote programming

If you have a question about this item then please send a message to: enquiries@keymoon.uk